MakoMat Custom EVA components
Warsaw, Indiana

Proof of fit.

OEM component study · Custom-cut EVA. Custom-designed, custom-cut EVA foam components for OEMs, shaped around the product they go into. Every quote starts from your project details, not a rate card.

MakoMat foam is already used in Encore RV applications.
Shown here: the Encore RŎG 14RKB bathroom floor and the RŎG 12RK-FB shower insert. Photos: Encore RV.

Branded gray EVA follows the fixtures and floor edge of this RV bathroom. 1 2 3
Fig. 01 / RV bathroom floor1Toilet base clearance2Branding in the part3Follows the floor edge
A tan EVA insert fits the shower area while leaving the drain opening clear. 4
Fig. 02 / RV shower insert4Drain left clear
Sheet01 / Installation studies
MaterialCustom-cut EVA foam
Seen atRV Component Expo · Shipshewana, IN · October 2026
In useEncore RŎG 14RKB · RŎG 12RK-FB

Every detail.Part of the whole.

The wider view. The bathroom floor is in the Encore RŎG 14RKB. The shower insert is in the RŎG 12RK-FB, shown here from the outside. Explore your next EVA component with us.

Encore RV trailer outdoors with a striped portable step beside its entrance.
Fig. 02 is inside this modelEncore RŎG 12RK-FB shower insert
Fig. 03 / Encore RV exterior and entry stepPhoto: Encore RV · RŎG 12RK-FB exterior
01 / OUTER CONTOUR A / FOOTPRINT B 02 / FIXTURE CLEARANCE YOUR BRAND 03 / BRANDING AREA DESIGN + QUOTE AGREED YOUR BRAND ILLUSTRATIVE EVA STUDY · NOT TO SCALE
04 / The drawing and the part

From outline to approval.

  1. 01

    Start with what you have.

    A drawing, dimensions, an existing part or a physical sample can start the conversation.

  2. 02

    Work through the details.

    Shape, clearance, material and authorized branding are reviewed for the application.

  3. 03

    Review the quote and design.

    The project moves forward after the relevant design and quote details are agreed.

  4. 04

    Prepare for production.

    Confirm the approved design, quantity and project details directly with our team.

Illustrative part and routing sequence. Not footage of the MakoMat workshop.

Skip the drawing

Drawn. Cut. Installed.

And then itgoes into the product.

The drawing above is an illustration. This is a real one: the branded bathroom floor in an Encore RŎG 14RKB, cut around the toilet base and the cabinet line.

See the RV applications

Branded gray EVA follows the fixtures and floor edge of this RV bathroom.
Real installation · Encore RŎG 14RKB · Photo: Encore RV

Your brand,in the part.

Branded components. Authorized lettering, artwork and patterns are incorporated into the part. Every EVA application can be developed with an embedded logo. Try a name to see the idea.

Design study of an EVA part with a name routed into the surface TOILET BASE YOUR BRAND

Design study. Final artwork, colors and materials are confirmed for each project.

Up to 16 characters. Use only names and artwork you own or are authorized to use.

Part shape

Shapes are simplified from Fig. 01, Fig. 02 and the helm concept image.

Color direction

Gray over black is the direction shown in Fig. 01, the Encore RŎG 14RKB bathroom floor.

Add this to a part brief

Start with thedetails you have.

What buyers ask. Straight answers on getting started, timing, repeat orders and artwork. Pricing is covered beside the part brief below.

Q1How does a project get started?

Start with the application, the dimensions you have, and any artwork, drawing, or reference you can share. We review the details, ask the practical questions, and outline the next step.

Q2What kind of timing should we expect?

Timing depends on the completeness of the information, material availability, project complexity, and quantity. We will discuss timing after reviewing the scope.

Q3Can we place repeat orders?

Repeat projects are welcome. We can discuss keeping a defined layout, artwork, and finish organized for future production conversations.

Q4Can you use our own artwork or branding?

Yes. Share the artwork you own or are authorized to use, and tell us where it belongs in the layout. Every EVA application can be developed with an embedded logo. We review artwork placement, scale, and the finish as part of the project.

All questions and the full process

Original photograph of the MakoMat family seated together in a vehicle.
From our family to your next project.

From Warsaw,Indiana.

Three people work on your part. Casey Hartley handles design and project review, Grant runs production and the CNC, and Matt Anthony looks after systems and software.

The family’s work grew from construction and contracting into custom CNC products and EVA applications.

CaseyDesign and project review
GrantProduction and CNC operation
MattSystems and software

Meet the family

Let’s talk aboutyour part.

The MakoMat family. Have a drawing, a sample or an application in mind? Email or call Casey to discuss the shape, fit and quantity you need.

What shapes a quote

2 of 7 already in your brief

  • Application
  • Dimensions
  • Quantity
  • Branding needs
  • Material reviewed together
  • Cut complexity reviewed together
  • Finishing and assembly reviewed together

Pricing depends on the application, material, dimensions, cut complexity, finishing, quantity, and any assembly or branding needs. We quote from project details rather than a one-size-fits-all rate.

Send Casey a part brief

Application
What you can share today
Branding in the part

No drawing yet? Sketch the part on a grid and attach it.

Need something to pass around first? Open the one-page overview and print it or save it as a PDF.

The button opens your own email app with the brief written out. If no email app opens, copy the brief and paste it into an email to Casey@makomatusa.com. Nothing is sent from this page. Attach your drawing or photos to the email.

Call MakoMatStart a part brief →